Lead flashing and lead work repairs in Holbrooks. Chimney bases, valley lead, abutment and party wall flashings on 1930s terraces and post-war semis. Correctly specified and dressed. Free quotes.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
📞 Call Now: 0247 798 1271On Holbrooks’s concrete-tile estates the pattern is predictable. Holbrooks is predominantly inter-war and post-war Coventry housing — 1930s semis and later council-built estates in concrete and clay tile, running north toward Little Heath and Whitmore Park. The lead work & flashing work we do here most often involves hip and ridge mortar failure on the 1930s semis, and nail sickness on the post-war concrete-tile stock toward Little Heath.
Typical signs on a Holbrooks roof:
Lead flashing failure is the most common cause of water ingress on Holbrooks's 1930s terraces and post-war semis. The thermal cycling in the West Midlands climate — cold wet winters followed by warm summers — works the lead progressively over decades. On CV6 properties built before 1970, lead flashings at chimney bases and party wall abutments have been cycling for 50–80 years. Step flashings eventually crack at the folds, soakers corrode through, and the mortar that wedges the flashing into the brick joint erodes away. The result is a gap that water exploits every time it rains.
The chimney base flashing is the most failure-prone lead detail on any CV6 property. It spans the junction between the tile course and the chimney brickwork — a point of constant movement as the chimney and roof structure expand and contract at different rates. We re-lead chimney flashings in code 4 lead as a minimum, dressed correctly with correct lap dimensions and wedged into a raked mortar joint — not surface-fixed with silicone, which is a temporary fix that lasts 2–3 years at best.
Valley lead failure on Holbrooks's 1930s terraces and post-war semis is a slower failure mode than chimney flashing but equally damaging when it occurs. Original lead valleys on Victorian and Edwardian properties in CV6 have often been in place for 80–100 years and are reaching the end of design life. We replace valley lead in code 5 with correct thermal movement joints — continuous lead without joints will buckle in summer heat and crack at the bends in winter.
The code designation of lead (code 3, 4, 5, 6, 7) determines its thickness and therefore its design life and application suitability. Code 4 (1.8mm) is the minimum for chimney flashings on CV6 properties. Code 5 (2.24mm) is correct for valleys. Using under-specified lead — code 3 is occasionally substituted by roofers cutting costs — significantly shortens service life. We specify the correct code for every application and confirm this in the quote.
No call-out fee. Written quote before work starts. 10-year guarantee.
We trace the leak to its real source — a stain inside often sits well away from the failed lead — and check the surrounding detailing. On Holbrooks roofs that means checking how far a problem on the 1930s semis toward Little Heath has really spread.
The lead renewal, code of lead, any timber or mortar making-good, and access are itemised in writing. Everything is itemised so a Holbrooks homeowner sees exactly what the Coventry price covers.
Old or failed lead is removed and the chase, upstand or valley is prepared for new leadwork. We fit around access on Holbrooks streets, including the tighter rows around Little Heath.
We fit the correct code of lead — Code 5 minimum for valleys and back gutters, with welted joints on chimney flashings — dressed and clipped to shed water properly. On the Holbrooks stock around Whitmore Park, we work to NFRC standards and check the surrounding area while up there.
Lead is pointed into the masonry, treated to prevent staining, and the workmanship guarantee handed over. We clear up, walk you through the work, and hand over the guarantee before leaving Holbrooks.
| Job | Typical range | Notes |
|---|---|---|
| Chimney flashing renewal (all sides) | £350–£700 | Code 5, welted joints |
| Valley lead renewal (per valley) | £400–£900 | Code 5 minimum |
| Step / abutment flashing (per run) | £250–£600 | Wall or extension junction |
| Box gutter or parapet lead | £600–£1,400 | Length dependent |
| Lead re-dress and re-point | £180–£450 | Where lead is still sound |
Guide prices for Holbrooks — every roof is quoted individually after a free survey, at Coventry rates rather than inflated city figures.
"Called for lead work & flashing on our 1930s property. Survey was thorough, quote was honest, work was done in a day. Very happy."
"Had a problem with our roof in Holbrooks and these were the first roofers who gave us a straight answer. Lead Work & Flashing done properly, 10-year guarantee in writing."
"Third time using them for roofing work across CV6. Consistent quality every time. Recommended."
Holbrooks’s 1930s terraces and post-war semis creates specific conditions that affect lead flashing and valley work work in CV6. The northern position with frost risk and limited natural shelter means nail sickness on post-war stock and lead flashing failure from frost cycling — patterns we see repeatedly across Holbrooks properties and that require a different approach to the same service in a more sheltered location.
The dominant property type across CV6 is 1930s terraces and post-war semis. For code 4 and 5 lead installation, this means working with materials, mortar and fixing systems that are specific to the era and construction method of Holbrooks’s housing stock. We carry the tile profiles, lead codes and mortar specifications most commonly required across CV6 in stock, and we assess each property individually rather than applying a uniform approach.
We cover Holbrooks and all of CV6 within our standard service window — free surveys within 2–3 working days, emergency call-outs within 2–4 hours. Written condition report and itemised quote provided before any work is agreed. All lead flashing and valley work work in CV6 carries a 10-year written workmanship guarantee and is backed by £5m public liability insurance. Call 0247 798 1271 to book a free survey.
The most frequent question we receive from Holbrooks homeowners asking about lead flashing and valley work is how to distinguish a repair that will hold from one that is masking a deeper problem. Our surveys are designed to answer this honestly: we assess the full roof condition, not just the visible presenting issue, and give you a written report covering current condition, remaining service life, and the full range of options at each maintenance threshold.
Re-sealing a lifted flashing costs £80–£150. Full flashing replacement at a chimney base costs £250–£500 in Holbrooks depending on size and access. Full valley re-lead runs £400–£900. We quote in writing before any work.
Signs include: damp patches on the chimney breast wall inside the property, water staining on the ceiling near a chimney or party wall, visible lifted or cracked lead visible from ground level, and missing mortar at the top edge of the flashing where it enters the brick joint.
If the lead itself is sound but the top fixing has failed, re-wedging and re-pointing the mortar joint can restore the seal. If the lead has cracked, corroded through, or been incorrectly specified, replacement is the right answer. We assess honestly at survey.
Code 4 as a minimum for chimney step and back flashings on CV6 properties. Code 5 for valleys. We confirm the specification in every written quote — if a roofer doesn't specify the code, ask them to.
Yes. We carry out all lead work including valleys, abutments, parapet gutters, dormers and chimney flashings across Holbrooks and all CV6 postcodes.
Correctly specified and installed lead flashings last 50–80 years. Code 4 chimney flashings installed correctly should outlast the roof tiles around them. Failures before 20 years typically indicate incorrect specification or installation — a reason to check the code used and the fixing method.
Yes. We dress lead to match original profiles on Victorian and Edwardian properties in CV6. Conservation area requirements in parts of Holbrooks may specify traditional lead rather than modern alternatives — we comply and advise at survey stage.
No call-out fee. No obligation. Written quote, 10-year guarantee.
0247 798 1271